Duct and Fittings

Machine Made Elbows

Lock Seem Pipe
Lock seam pipe is used in light duty applications where abrasion is not a problem. Our lock seam pipe can be fabricated from 24 ga. to 20 ga.

Fabricated Gore Elbows
This is our most common elbow. we use this type in virtually every industry. We can make the radius longer for material handling applications and shorter where abrasion is not a problem. We typically do A 2 x center line radius in light to medium applications and A 2-1/2 x center line radius in heavy material handling applications. We can fabricate gored elbows from 16 ga. to 3/8″ plate and from galvanized, stainless, black carbon or painted.

Standard Elbow Construction:

  • 5 Piece Pattern
  • Fully Welded Gores
  • Galvanized Finish
  • 2x Center Line Radius

Fully Welded Pipe

Our standard construction is one piece rolled and welded solid with one seam. All pipe measurements are OD x length. Our duct is fabricated in 5′ lengths and can be welded solid to any length required. In most cases we ship duct in 10′ or 20′ lengths. Our welded pipe can be fabricated from 16 gauge to 3/8″ plate. All pipe is smooth inside and free of burrs and rough edges. Pipe comes in galvanized, stainless, black carbon and painted.

Heavy Duty Flat Back Elbows

These are great elbows for heavy wear applications. Flat back elbows are a square constructed elbow typically with a 10 ga. housing and A 1/4″ plate back. The back plate can be either welded solid or bolted on for replacement without removing the entire elbow. Our backs can be fabricated from mild steel, stainless steel, abrasive resistant plate i.e. AR #400 or T1 wear plate. These elbows are the solution for tough applications.

Floor Sweeps

The face has a hinged door that seals off the air flow when it is not being used. There is a lever on the side of the door that can be operated by foot.